SECURITY GATES DEVICE

• US 20100259361A1
• Filed: 04/09/2010
• Published: 10/14/2010
• Est. Priority Date: 04/11/2009
• Status: Active Grant

• Current Assignee: Hmoud Sayaf Al Shahrani
• Original Assignee: Hmoud Sayaf Al Shahrani
• Inventors: AL SHAHRANI, Hmoud Sayaf
• Granted Patent: US 8,525,698 B2
• Time in Patent Office: Days
• US Class Current: 340/5.710
• CPC Class Codes: E01F 13/126 Pitfall barriers, causing the vehicle to face a step-like obstruction
• CPC Class Codes: F41H 11/08 Barbed-wire obstacles; Barricades; Stanchions; Tank traps; Vehicle-impeding devices; Caltrops making barbed wire B21F25/00; barbed-wire fencing E04H17/04; road barricades, obstructing passage of vehicles or pedestrians E01F13/00
• CPC Class Codes: G08B 15/007 by trapping

Abstract

The security gate device is the one that has the ability to deter and seize unauthorized vehicles to enter and that attempt to envade the place; this can be done automatically without giving human being orders. The device is equipped with a room consisting of bumpers and anti-blast walls to protect the facility and the workers from damage caused by such an explosion. Meanwhile, this device can arrest the intruders of the gate.

Claims

1. - An integrated security system that includes:

Cars bumper at the entrance gate 2.

A sensor designated to identify the metal pieces pre-loaded in the device with an identification system of the employees'"'"' cards to gain a permission to enter, as well as an imprint identification system to get a permission to enter. The three-way system operas as in 31. In addition, any similar system can be used to presumably carry out the same purpose.

A second sensor device 3, designated for vehicles and people as per demand and needs on the gate.

Weapons detector 7.

Explosives detector 8.

A direct visual imaging device with lighting for the inspection of vehicles 6 to transfer the image to the screen 28.

Vertical gate 9.

Beam device 10 placed on the two traffic signals 43, and the device order to operate according to the traffic signals with red and green lights and floor pad 11 works in parallel with the ray device 10 along with the two traffic lights.

The surface of the basement room ceiling 26 is equipped with studs 12 and spring 44 and having a track 24 where a sensor 45 is placed in its center. Inside this track there is a speed bump 25 with parts under it 36 along with a column. Also, it forces the surface to go down as a result of the effect of the vehicle pushing the bumper in a mechanical movement. This system fully absorbs the vehicle speed to stop it. It has lengths and base in the floor 35 can be replaced in any other place carrying out the same purpose. In addition, hydraulic pistons 32 installed in the surface of the device facilitate the surface up-down movement.

The room under the surface shall have sufficient depth and lengths, sides and floor 22, 23 as well as a frontal tunnel as needed 38, 37, 40, and 41.

Steel mesh cages 21 or any other material to meet the same purpose which rises up from the basement room through the pistons 33 for the detention of persons.

An emergency gate can be opened from any part of the room to remove detainees and to carry out inspections.

An alarm bell 17 vibrating 18 camera 19 confusing spotlights 20.

A sensitive device 27 of the gate specific for individuals climbing the main gate.

A wireless signal receiver 13.

Concrete bumpers 15, any means can also be used carrying out the same purpose, walls or sand bags and the like.

An automatic control device of the system 16 via the light according to the programming required.

A computer 29 and a control unit to operate the system manually through the guard using electric or hydraulics plugs also any other means can be used to carry out the same purpose.

An alarm bell 5 for workers at the gate.

cats eyes 14 and asphalting the surface with drawing the lines on it.

Device demonstrates the entry of employees and the time 30 and any device can be added along with the device system for additional new software to the existing one.

A wire cable 39 fixed on a net 4 to be raised from the rear side.

Fire extinguisher 40 with sensors and plumbing.

A place for collecting rain 41, waste, and so on.

The inside depth of the room from 42 encompassed from the sides.

2. - Security gates device in accordance with claim 1 where the car bumper 2 includes and electronic weighing scale 1 that weighs the vehicle as they pass over the bumper. It shall be installed in the bottom of the bumper.

3. - Gates security device in accordance with claim 1, where the sensor of the metal pieces 31 identifies the employees'"'"' vehicles via metal pieces attached to their vehicles. The sensor produces a signal to the system to open the barriers and so they pass the device components safely. Also, a special device for electronic cards and imprint can be added or any other system that carries the same purpose to gain the permission to automatically enter the gate. These issues are used at the gates where there are not any labors.

4. - Gates security device in accordance with claim 1, sensor 3 to give order of operating the system for one vehicle only to avoid duplication of the entry of several vehicles in a single command, as well as people.

5. - A security gates device in accordance with claim 1 where the weapon detector, explosives detector, visual inspection device and lighting 6, 7, 8 are all operating simultaneously by one movement and one course of action plan to inspect the vehicles and the like with the addition of other detectors as needed to carry out the same purpose and a device 6, 7, 8 can be installed on the surface of the room floor 22 or the ceiling 26 according to the appropriate location, which satisfy the need for that device to inspect and transfer live images on the screen 28 in the guard'"'"'s room.

6. - A security gates device in accordance with claim 1 where the device 6 is linked to the visual display screen 28 and to the guard'"'"'s room to inspect the vehicles.

7. - A security gates device in accordance with claim 1 where the weapon detector and explosives detector, 7, 8 in the case of discovery of any weapons or explosives to give an electronic signal so that all the components of the system operate to provide a comprehensive security protection as well as lifting the rear clamp barrier 4 tied to a wire cable 39 to lift the vehicle from the backside to force it go down into the fenders room surrounded by security isolators to resist the blast so as to protect the facility and employees. The location of the inspection devices to be placed inside the room floor 22 so that the inspection is carried out in the fenders room. When there is any signal that there is something, paragraphs 2, 21, 27, 17, 18, 19, 20 shall operate along with the sliding down 32 and rising up 33 of the pistons and the warning bell 5.

8. - A security gates device in accordance to claim 1 which has a gate 9 to prevent vehicles from reaching the rays 10 and 11 the pad accidentally so as to take certain measures in the inspection area and the like.

10. - A security gates device in accordance with claim 1 where the surface 26 is equipped with studs 12 which operate by opening and closing using a piston where they receive the commands to open as in 10, 11, or by a command of the guard. the surface goes down from the front side where a weight is attached to the vehicle connected with a rubber spring 44 to avoid to be collided with the room floor as well as the ceiling is connected with a hydraulic pistons 32 to raise and lower surface supported by iron bridges and the blacksmith work and the like to open the track 24 in the middle of the same there is a sensor 45. Within this track there is a bump 25 so as the authorized vehicle complies with the pre-determined speed and has parts under the bump 36 and the base column 35 and the post of the base and a spring 34. They all operate to absorb the speed of the unauthorized vehicle as well as to force the surface to go down from the front side when the barriers is extended in the track. Also, to move or and touching the sensor 45 to operate the whole system via the sensor 45 which shall do the following:

Remove the rear studs 12 using a piston.

Give a command to the piston of the hydraulic arm 32 to force the surface 26 to go down from the back side into the room between the fenders and the isolators 22, 23.

The hydraulic arm of the piston 33 lifts up the mesh cages 21 from the room up till it surrounds the vehicle and the persons to detain them. At the STOP stage the arm is provide d with electricity.

The bumper No. 2 is lifted to prevent any intrusion supporting the first intrusion as well as to protect the back net 4 from being destroyed.

the main gate is closed where there is a sensor 27 located over the gate.

Runs the alarm bell 5 of the employees at the gate as well as the alarm system 17 installed for employees and persons in-charge inside the facility and to run the vibrator 18 and the camera 18 is turned on for full event photography to be used in the investigation. Spotlights 20, which do not work except in the case of emergency, should have a separate electricity line other than one available for the gate which works to give an unsteady lighting so as not to see what is behind the lighting.

11. A security gates device in accordance with claim 1 paragraphs 22, 23 having insulators and cement works and the like to resist and absorb the blast of the vehicle caught by the device so as to have enough thickness in all edges and sides of the basement room taking in consideration that a frontal tunnel 38 can be added within an enough space in front of the room to accommodate large vehicles and trucks with the installation of a surface for this tunnel 37 made of concrete or anything else satisfy the same purpose so as the vehicles pass over the tunnel safely. It also equipped with a fire extinguisher 40 with sensors and plumbing 41 the drainage site of rain and wastes through specific locations and others as well 21 nets inside and around the sides which rise up upon demand taking in consideration that room has a rectangular shape or otherwise satisfy the purpose knowing that the length, width and depth are according to the requirements of the gate.

12. A security gates device in accordance with claim 1 where the command is received by the alarm bell 17 the vibrator 18 the camera 19 and curly confusing lighting 20 which receives guidance from a sensor 45 when it moves by the bumper located in the track.

13. A security gates device according to claim 1 where the main gate is equipped with sensors 27 as they give a signal to the system to run in case there are individuals climbing the gate, then it gives a signal to detain the climbers through 21 and running the device numbers according to the programming which should be specified for comprehensive security protection.

14. A security gates device according to claim 1 where wireless signal receiver 13 for running all parts of the device by wireless remote control or manual control via the guard or controls buttons or any other means satisfying the same purpose.

15. A security gates device according to claim 1 where the concrete work 15 whose role is to organize the traffic by forcing the vehicles to pass over the surface of the device. Also, when a blast takes place it prevents the fragments from its direction to the sites around the device and it can be replaced by walls or sand bags or any substance can be used to satisfy the same purpose.

16. A security gates device according to claim 1 which is a device to control the system automatically through light to have a programming as needed either after the end of the working hours, at sunrise or sunset, e.g. pushing down the surface 26 and raising the fender 2 at sunrise or sunset and other programming can chosen to satisfy the same purpose according to the need of the gate.

17. A security gates device according to claim 1 which is a computer 29 controlling the system programming and fully running the system as well as issuing commands to the manual system by the guard at the gate. It can be replaced by another device satisfy the same purpose.

18. A security gates device according to claim 1 which is an alarm bell 5 for the guards at the gate to notify them that the device is operational and that the gate was exposed to unauthorized entry.

19. - A security gates device according to claim 1 which is cats eyes 14 along with asphalting the surface 26 as well as drawing lines on the road so that the device is placed in a secret place to the extent that nobody sees or even know that such a device is available. A decoration can be used instead of asphalting in various forms as the purpose is to have the device in a position where it can be seen using the surface forms satisfying the purpose.

20. A security gates device according to claim 1 which is a device 30 identifying the employee'"'"'s entry and the time. Also, any device can be added to the device system using the new software compared to the one exists and as needed.

21. A security gates device according to claim 1 which a wire cable 39 is having lengths attached to the net 4 and the other end is the beginning of the surface 26. As when net rises 4 using a piston 33, the wire cable 39 rises the vehicle form the backside and forcing it to go down the surface then to the room. Also, it deters and forces the vehicles that get back of the device, then it forces them to go down in a balanced way 39 on the level 26 with tunnel surface which has more depth level 26 according to in a straight line. the vehicle from the rear and forcing it to land on the surface and then room as well as to deter and force vessels undo device it forces them out in a balanced way, 39 with level 26 with tunnel floor in straightening one more depth.

22. A security gates device according to claim 1 which is fire extinguisher 50 with fire sensors and carrying out full plumbing of the room from inside and outside.

23. A security gates device according to claim 1 which is a site 41 for collecting and draining the rain water and waste and other.

24. A security gates device according to claim 1 where it is possible to open the emergency door from any location of saving and getting out the detainees inside the room, it can be used to carry out inspection to go down inside the room.

9. The command is directed to the ray device 10 and the ground pad 11 and linked with the operation of the traffic light (43) which contains the green and red lights that allows the vehicle or persons to go beyond device components safely. In case the traffic light is red then the commands are directed from the two devices 10, 11 not to allow the vehicles and persons to enter and not to exceed device equipment safely. When a vehicle or persons passing the device, then it gives a command to the front studs 12 to open and the surface goes down below the room floor. A weight is used to push down the vehicle using a rubber spring to prevent the collision of the vehicle with the ceiling or the floor as well as directing a signal at the same time to the speed bump 25 rises by 36 very soon using a piston and the spring to serve as a barrier to absorb the vehicle speed instead of the a speed bump so that the vehicle hits and pushes it in the track 24 forward to absorb the speed to enable the surface to go down in mechanical movement as well as to contact the sensor 45, within the track 24 to run a full system for the protection of comprehensive security.